Indoor People Counting
We have a range of indoor people counters, to suit all your needs.
Indoor Micro IR Beam People Counter. (MIR7B)
MIR7B is an accurate people counter with no cabling required. Can be supplied with internal data logger or wireless option for download of time-date data directly to PC/laptop.
The Indoor Micro IR Beam Counter MIR7B is our most popular indoor counter and has a new extended sensing distance of up to 8 metres. It is an advanced, very small, dual component unit, which records people as they pass between the two units. The units are placed on either side of the entrance. The units are easy to install and as they are battery powered, no cables are required The counter has a 6 digit LCD display that is reset with the supplied magnet. It can operate over wide entrances, is insensitive to ambient light changes etc and is very reliable. It can be used with a wireless link to a PC or with a datalogger. The units have battery check LED and a beam alignment indicator making installation very easy. The unit operates for over a year using standard PP3 alkaline batteries. The units are housed in a robust black box with an integral battery compartment. If required we can also supply a mains version.
Indoor
Long Range IR Beam People Counter (LIR7)
LIR7 is a robust accurate long range people counter suitable for use in bus stations etc. No cabling is required. Can be supplied with internal data logger or wireless option for download of time-date data directly to PC/laptop.
The LIR7 is an advanced people counter which uses fast pulse narrow beam IR. The counter consists of an infra-red beam transmitter and receiver, that can be set positioned up to 12 metres apart. The counter incorporates advanced filtering making it insensitive sunlight. The counter has very low battery consumption and the AA lithium batteries will last for over 4 years . The unit is very easy to set up as there is no cable between the two units. The counter is supplied in strong polycarbonate housing with tamper-proof screws to help prevent damage from vandals which makes the counters suitable for shopping centres, bus stations etc. It can be used with a wireless link to a PC or with a datalogger.
Indoor Micro IR Proximity People Counter. (MIR7P)
A one-sided people counter that can be used above or to the side of entrances. Can be supplied with internal data logger or wireless option for download of time-date data directly to PC/laptop. A robust unit suitable for many situations such as libraries and public toilets.
The Indoor Micro IR Proximity People counter MIR7P incorporates the following features:
-
Robust construction
-
Battery operated
-
Single component unit that can be installed overhead or on one side of entrance
-
Can be installed overhead or on one side of the entrance
-
Sensing distance is 1 to 1.5 metres from counter
-
Easy to install - full instructions provided
-
Insensitive to ambient light changes etc
-
Battery check and 'detect' LED
Indoor Micro IR Proximity People Counter. (MIR5P)
The Indoor Micro IR Proximity People counter MIR5P is a very small, single component unit, which records people as they pass in front of the counter. It is normally placed above a door. The unit is very compact, is easy to install and, as it is battery powered, no cables are required. The unit detects people by sending out a pulse of infra-red light which is reflected when a person comes into range of the unit. The unit has a small LCD display which can be reset using a switch. Under standard conditions the battery will last in excess of one year.
This unit is being superceded by the MIR7P but we still have a few of these left.
Low Cost Dual Direction IR People Counter DIR5R
This is a low cost mains operated unit, that uses a reflected infra red beam to count the number of people passing in both directions. It displays the counts for both directions on the multifunction LCD display.
Dual Beam People Counter. DBPC
This is a very robust high specification counter that uses infrared sensors to count people passing in either direction. It can operate on passage ways up to 4 metres wide and can be used with the Chambers Loggers. It can also be used to display the number of people in a building. It operates from 12 to 24 volts and is suitable for integration into other systems. Can also be used to record the number of people in a room.
It can be used with a wireless link to a PC or with a datalogger.
Wireless link to PC
Many of our indoor counters can be supplied with a radio
transmitter which automatically uploads the number of people counted onto
a PC via a receiver unit. The receiver can collect data from several
counters. The data is stored in a table on the PC, which can be very
easily imported into an Excel spreadsheet for further analyses.
For units which are a long distance from the PC repeater units can be
supplied to transfer the information.
Datasheet
for wireless receiver (pdf file)
Data logger
The logger can be used on majority of the Chambers counters, it records the number counted in a preset time interval. It is very easy to use and requires no extra equipment as the recorded information is downloaded directly into a PC. To add extra flexibility the logger can now be unplugged from the counters so that it can be taken to a PC. The software provides a graphical display of the counts per period and allows the user to export the data into a spreadsheet.
If you want further information from your data, send us your data on disc or via email and we will analyse it for you.
Indoor people counter page updated: 12/02/2012
Quick Links
A & P Chambers Ltd
Kaluna House
Nairnside,
Inverness,
Scotland,
IV2 5BU
Telephone:
+44(0)1463 790400
Fax:
+44 (0)1463 213080
e-mail: sales@chambers-electronics.com
