DIP-WELL MEASURING PROBE

Water Level Logger

Description

The Dip-well Measuring Probe is designed to accurately measure the distance from the top of the dip-well to the water table. The Probe is very easy to use and can be operated with one hand. The Probe senses the water level by detecting the change in internal reflection of a light source which is encapsulated in the probe tip. This detection method gives very reliable and trouble free operation. To operate the Probe, the tip is lowered into the well and when the tip reaches the water level an audible signal is produced. The water level can then be read directly from the scale on the probe. The entire unit is waterproof and is very robust.

Specification

Probe tip	Length from 1 to 2 metres (or as required) Diameter 28 mm
Construction	Fully encapsulated
Detection method	I.R. reflective
Audible output	High output waterproof transducer
Indicator	Low battery alert
Control box	Waterproof polycarbonate
Power supply	9v Alkaline battery (e.g. Duracell MN1604)
Battery Life	40 hrs.