Bicycle Counters

Mountain bikes

Radio Beam Bicycle Counter

NEW DETECTION TECHNOLOGY
DETECTS ALL TYPES OF BICYCLES
SIMPLE TO INSTALL, NO NEED DIG UP PATH SURFACE
IDEAL FOR ROUGH TRACKS, SUCH AS MOUNTAIN BIKE TRAILS
CAN BE INSTALLED IN STONE WALLS, GATE POSTS, ETC.
ALL-WEATHER OPERATION
EASY TO HIDE
DATA LOGGER OPTION AVAILABLE

This latest addition to our bicycle counter range has many advantages over existing methods for counting bicycles, and can be used on all types of path surfaces. The counter consists of 2 self-contained units that include small antennas which are simply placed on either side of the path. There is no need to dig a trench in the path and the unit can be installed very quickly. The unit uses advanced metal detecting technology to reliably count alloy and steel bicycles as they pass between the units. The signal can pass through rock etc. so that the counter can be easily hidden from view. The units are robust and fully waterproof. A data logger can be supplied to enable data downloads directly onto a PC for analysis. A new model is now out that has reduced current consumption.

Datasheet

Datasheet (pdf file)

RadioBeam Cycle Lane Counter
RBB7 - CL

New product developed using our unique and proven RadioBeam technology
Accurately counts cyclists in cycle lanes adjacent to car lanes
Counts cyclists when the car is passing simultaneously. Excludes pedestrians.
Detects bikes up to 0.8 metre from sensor and excludes cars more than 1.2 metres from sensor
Detects all types of bikes
Single sided unit with all elements (control box, transmitter, receiver, bike antenna, batteries, logger, etc) housed in single secure protective housing box.
Reliable all-weather operation
Suitable for all types of surfaces, including paved
Installed above ground at one side of road, path, etc. No path disturbance.

The RBB7-CL bicycle counter was developed to provide an accurate counting system for cyclists that are cycling in locations in close proximity to cars such as cycle lanes. It will exclude cars more than 1.2 metres from the sensor and all pedestrians. It can also be used on cycle lanes of less than 1 metre width where a single-sided installation is preferred.
We have developed this counter using our well established RadioBeam technology to provide accurate and reliable counting under all weather conditions.

Datasheet

Bicycle Counter 2000

This counter is proving very popular and is extremely reliable. It uses advanced metal detecting technology to detect and count bicycles as they pass over the detection antenna. This counter will detect both steel and alloy wheels but will not detect walkers. The sensor is buried below the ground surface.

Datasheet

Dual Bicycle and People Counter

The RBBP7 is the latest model of the radio beam bike and people counter that uses dual frequency technology, that was developed by us, that enables walkers and cyclists to be individually counted.

The counter consists of two units that are placed on either side of the path, and no cable is required to run between them, making installation very easy. Each unit has two sets of antennae, which are attached via a lead and placed on either side of the road. The radio beam will pass through plastic signs etc. so that the unit is easy to disguise.

We can also supply a unit based on this counter that counts horses, pedestrians and cyclists individually.

Datasheet (pdf file)

Data logger

The logger can be used on all the counters, it records the number counted in a preset time interval. It is very easy to use and requires no extra equipment as the recorded information is downloaded directly into a PC. To add extra flexibility the logger can now be unplugged from the counters so that it can be taken to a PC. The software provides a graphical display of the counts per period and allows the user to export the data into a spreadsheet.

If you want further information from your data, send us you data on disc or via email and we will analyse it for you.

Datasheet (pdf file)