Front Page | Electronic Design Service | People Counters| Company Profile | Contact Us

CHAMBERS ELECTRONICS UK

Electronic Design and Instrumentation Specialist

Established 1987

 

RADIO BEAM PEOPLE COUNTER RBX3

People Counter

  • NEW TECHNOLOGY

  • HIGH RELIABILITY UNDER ALL WEATHER CONDITIONS

  • COUNTS PEOPLE, HORSES, SKIERS, CARS and CYCLISTS etc.

  • LOW BATTERY CONSUMPTION

  • ALL WEATHER OPERATION

  • VERY LONG SENSING DISTANCE

  • EASY TO INSTALL (NO LEADS)

  • EASY TO HIDE AS BEAM PASSES THROUGH WOOD AND PLASTIC

Description

Chambers Electronics have developed Radio Beam Counting Technology to produce a people counter that is the most advanced and reliable trail counter on the market today. It will operate under all weather conditions, including heavy rain and snow, and will give accurate counts. The counter consists of a radio transmitter and receiver, and operates by detecting the change in radio signal as a person walks between them. The counter is very adaptable and can be used for counting walkers, skiers, snowmobiles, cars etc. The transmitter and receiver can be set up to 8 metres apart (25 metres for the long distance unit) and can therefore be positioned far back from the path so that they cannot be seen. The counter has very low battery consumption and batteries will last for up to 400 days. The unit is very easy to set up, as there is no cable between the two units. The sensor has a narrow beam and can therefore discriminate between individuals in groups if the unit is positioned where walkers normally walk in single file. The radio beam passes through thin wood and plastic so that the counter can be hidden behind signs etc.

 

Indoor use

The counter is also ideal for indoor counting as both the transmitter and receiver can be placed behind signposts, pictures etc.

 

Dual counting of people and horses

The counter can be used for discriminating between people and horses and can be supplied with a dual output for counting both categories.

 

Specifications

Detection Method:
 Radio beam
Approvals: UK DTI Approved to MPT 1349
Frequency: Frequency is dependant on country regulations
Housing: Robust polycarbonate housing
Dimensions
Transmitter: 120mm(height) x 80mm(width) x 55mm(depth)
Receiver: 120mm(height) x 122mm(width) x 55mm(depth)
Sensing distance:

8 metres max. for standard wide angle receiver.

25 metres max. for long distance unit

Waterproofing: Waterproof to British Standard IP67
Indicators  
Transmitter:

Battery check LED

Receiver:

Receiver: 8 digit LCD counter

(optional when supplied with logger)

Beam strength LED indicator

Battery check LED

Controls:

Display and indicators ON (magnetic switch)

Reset counter (magnetic switch)

Battery:

AA lithium batteries (transmitter and receiver):

>400 days operation

Other battery options are available

 

Data logger:

A microprocessor based data logger can be supplied which is connected to the receiver box. The logger records the number of people passing in a pre-set time interval. This information is retrieved and analysed by connecting the logger to a standard PC. The logger records data for up to 670 days if set at 1 hour interval.

 

Additional housing:

A robust housing can be supplied in situations where vandals may damage the counter. The housing has low absorption to the radio beam and has tamper proof screws.

 

Separate battery and logger box:

If required a separate waterproof box can be provided for the battery and logger in situations where this would be beneficial.

 

 

We reserve the right to change without notice the specifications contained in this leaflet

© A & P Chambers 2004

Quick Links

 

Home Page

Electronic Design Service

People Counters

    Indoor  People Counters

    Outdoor  People Counters

Car Counters

Bike Counters

Bike and People Counters

Horse Counters

Electronic Marking System

Water Level Measurement

Company Profile

Contact Us

A & P Chambers Ltd

Kaluna House

Nairnside,

Inverness,

Scotland,

IV2 5BU

 

Telephone:

+44(0)1463 790400

Fax:

+44 (0)870 161 7442

 

e-mail: sales@chambers-electronics.com